How to upgrade firmware from v1.1.2.0 to v1.2.2.x Procedure_v1.0

ManualsBrandsEdgecore Networks ManualsEnterpriseGigabit Web-Smart Pro PoE Switches

How to upgrade firmware from V1.1.2.0 to V1.2.2.x Procedure

--------------------------------------------------------------------------------------------------------

Before upgrade to V1.2.2.x firmware, please read the following notification.

If you does not agree, please stay current version.

a. After upgrading the V1.2.2.x code, you could not downgrade to V1.1.2.0

(Reason: The RAM location already change)

b. If you have any problem, Please contact Edgecore Tech Support Team for help.

--------------------------------------------------------------------------------------------------------

Upgrade to V1.2.2.x firmware from V1.1.2.0

(Upgrading V1.1.2.0 to V1.2.2.x support from CLI only. Don’t upgrade from web UI.)

Please make sure to follow the procedure step by step.

If your version is V1.2.2.0 or V1.2.2.x already, you could jump to the page 5 to upgrade the

last version firmware directly.

1. Check current ECS2100 version:

Loader Version:0.1.1.6

Operation Code Version: 1.1.2.0

Summary of content (7 pages)

PAGE 1
How to upgrade firmware from V1.1.2.0 to V1.2.2.x Procedure -------------------------------------------------------------------------------------------------------Before upgrade to V1.2.2.x firmware, please read the following notification. If you does not agree, please stay current version. a. After upgrading the V1.2.2.x code, you could not downgrade to V1.1.2.0 (Reason: The RAM location already change) b. If you have any problem, Please contact Edgecore Tech Support Team for help.
PAGE 2
. Copy ECS2100_Jump_V117.8.8.1.bix & ECS2100_Special2_1.2.2.0_0731.bix to D:\ECS2100-V1.2.2.0 3. Run the TFTP server (Set the Directory to : D:\ECS2100-V1.2.2.0) 4. Use Telnet or console to connect the switch. (We don’t upgrade from web , we support CLI method only).
PAGE 3
5. Follow the steps to upgrade “ECS2100_Jump_V117.8.8.1.bix” Step1: Console#copy tftp file TFTP server IP address: 192.168.2.200 Choose file type: 1. config; 2. opcode: 2 Source file name: ECS2100_Jump_V117.8.8.1.bix Destination file name: ECS2100_Jump_V117.8.8.1.bix Console#config Console(config)#boot system opcode: ECS2100_Jump_V117.8.8.1.bix Console(config)#end Console#reload System will be restarted. Continue ? y 6. Follow the steps to upgrade “ECS2100_Special2_1.2.2.0_0731.
PAGE 4
TFTP server IP address: 192.168.2.200 Choose file type: 1. uboot_runtime_u: 1 This system will automatically reload after finish. Are you sure you want to upgrade uboot and runtime together(y/n)? y Source file name: ECS2100_Special2_1.2.2.0_0731.bix 7. Check the version and file name and Done a. Loader :0.2.1.1 b. Operation Code Version:1.2.2.0 c. File name:runtime_p2.bix 8. ECS2100_Jump_V117.8.8.1.bix and ECS2100_Special2_1.2.2.0_0731.
PAGE 5
Firmware Name ECS2100_jump_V117.8.8.1.bix ECS2100_Special2_1.2.2.0_0731.bix ECS2100_V1.2.2.0.bix Purpose For upgrade v1.1.2.0 to v1.2.2.0 use only For upgrade v1.1.2.0 to v1.2.2.0 use only For v1.2.2.0 use. Upgrade to V1.2.2.x firmware from V1.2.2.0 (Upgrading V1.2.2.x to V1.2.2.15 support from CLI & Web) 1. Copy ECS2100_V1.2.2.9.bix to D:\ECS2100-V1.2.2.9 2. Follow the steps to upgrade “ECS2100_V1.2.2.9.bix” Console#copy tftp file TFTP server IP address: 192.168.2.200 Choose file type: 1. config; 2.
PAGE 6
Check the version and file name and Done a. Loader :0.2.1.1 b. Operation Code Version:1.2.2.9 c. File name:ECS2100-V1.2.2.9.bix 3.
PAGE 7
FIRMWARE CHANGES AND ENHANCEMENTS: Runtime V1.2.2.15, Loader 0.2.1.1 EPR Headline 1 ECS2100 [enhance] support LACP passive mode 2 ECS2100 [enhance] switching B/W L2 DHCP relay and L3 DHCP relay 3 ECS2100 [enhance] support simple chinese web page, web help page. Runtime V1.2.2.9, Loader 0.2.1.1 EPR Headline 1 ECS2100 [enhance] remove ERPS 2 ECS2100 [enhance] support RIP Runtime V1.2.2.0, Loader 0.2.1.