Installation Guide-R03
Table Of Contents
- How to Use This Guide
- Contents
- Figures
- Tables
- Switch Description
- Installation Overview
- Switch Chassis
- Power and Grounding
- Port Connections
- Switch Management
- Troubleshooting
- Index
Chapter 3
| Switch Chassis
How to Install the Switch in a Rack
– 26 –
Figure 13: Installing the Switch in a Rack
5. If installing a single switch only, go to “Power and Grounding” on page 29.
6. If installing multiple switches, repeat steps 1 to 4 to mount the switches
following your rack plan.
Wall Mounting (ECS2100-10PE only)
The ECS2100-10PE can be mounted on a wall.
Caution:
For safe operation, install the switch with RJ-45 ports facing up.
Rack Mount Screws
1
1
Set two screws in the wall 150 mm (5.9 in.) apart.
Slide the switch’s wall mounting slots down onto the screws so that the unit is secure.
2
1
1
2