CLI Reference Guide-R07

Chapter 4 | System Management Commands
System Status
– 103 –
IP_SERVICE_GROU 0.00 0.00 0.00
IP_SERVICE_PROC 0.00 0.00 0.00
L2_L4_PROCESS 0.00 0.04 0.20
L2MCAST_GROUP 0.00 0.00 0.00
L2MUX_GROUP 0.00 0.00 0.00
L4_GROUP 0.00 0.00 0.00
LACP_GROUP 0.00 0.00 0.00
MSL_TD 0.00 0.00 0.00
NETACCESS_GROUP 0.00 0.00 0.00
NETACCESS_NMTR 0.00 0.00 0.20
NETCFG_GROUP 0.00 0.00 0.00
NMTRDRV 1.80 1.53 2.60
NSM_TD 0.00 0.00 0.00
RIP_TD 0.00 0.00 0.00
SFLOW_PROC 0.00 0.00 0.00
SMTP_TD 0.00 0.00 0.00
SNMP_GROUP 0.00 0.00 0.00
SNMP_PROC 0.00 0.00 0.00
SNMP_TD 0.00 0.00 0.00
SSH_GROUP 0.00 0.00 0.00
STA_GROUP 0.00 0.00 0.00
STKCTRL_GROUP 0.00 0.00 0.00
SWCTRL_GROUP 0.00 0.00 0.00
SWDRV_MONITOR 0.00 0.00 0.00
SYSDRV 0.00 0.00 0.00
SYSTEM 2.00 1.60 2.01
UTILITY_GROUP 0.00 0.00 0.00
WTDOG_PROC 0.00 0.00 0.00
XFER_GROUP 0.00 0.00 0.00
XFER_PROC 0.00 0.00 0.00
XFER_TD 0.00 0.00 0.0D
Console#
show running-config This command displays the configuration information currently in use.
Syntax
show running-config [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
port-channel channel-id (Range: 1-8)
vlan vlan-id (Range: 1-4094)
Command Mode
Privileged Exec
Command Usage
◆ Use the interface keyword to display configuration data for the specified
interface.