CLI Reference Guide-R07

Chapter 4 | System Management Commands
System Status
– 106 –
System Up Time : 0 days, 1 hours, 43 minutes, and 54.87 seconds
System Name :
System Location :
System Contact :
MAC Address (Unit 1) : 00-11-3B-11-22-33
Web Server : Enabled
Web Server Port : 80
Web Secure Server : Enabled
Web Secure Server Port : 443
Telnet Server : Enabled
Telnet Server Port : 23
Jumbo Frame : Disabled
Unit 1
Main Power Status : Up
Console#
Table 15: show system – display description
Parameter Description
System Description Brief description of device type.
System OID String MIB II object ID for switch’s network management subsystem.
System Up Time Length of time the management agent has been up.
System Name Name assigned to the switch system.
System Location Specifies the system location.
System Contact Administrator responsible for the system.
MAC Address MAC address assigned to this switch.
Web Server/Port Shows administrative status of web server and UDP port number.
Web Secure Server/Port Shows administrative status of secure web server and UDP port
number.
Telnet Server/Port Shows administrative status of Telnet server and TCP port number.
Jumbo Frame Shows if jumbo frames are enabled or disabled.
System Fan (ECS2100-52T) Shows if forced full-speed mode is enabled.
System Temperature Temperature at specified thermal detection point.
Main Power Status Displays the status of the internal power supply.
Redundant Power Status Displays the status of the redundant power supply.