CLI Reference Guide-R07

Chapter 13 | Power over Ethernet Commands
– 404 –
370000 mW for ECS2100-28PP without external power supply
740000 mW for ECS2100-28PP with external power supply
Command Mode
Global Configuration
Command Usage
◆ Setting a maximum power budget for the switch enables power to be centrally
managed, preventing overload conditions at the power source.
◆ If the power demand from devices connected to the switch exceeds the power
budget setting, the switch uses port power priority settings to limit the
supplied power.
Example
Console(config)#power mainpower maximum allocation 180000 unit 1
Console(config)#
Related Commands
power inline priority (406)
power inline This command instructs the switch to automatically detect if a PoE-compliant
device is connected to the specified port, and turn power on or off accordingly. Use
the no form to turn off power for a port.
Syntax
power inline
no power inline
Default Setting
Detection is enabled for PoE-compliant devices.
Command Mode
Interface Configuration (Ethernet ports 1-8/24)
Command Usage
◆ The switch only provides power to the Gigabit Ethernet RJ-45 ports.
◆ When detection is enabled for PoE-compliant devices, power is automatically
supplied when a device is detected on the port, providing that the power
demanded does not exceed the port’s power budget or the switch’s power
budget.