ECS4100 Series CLI Reference Guide-R07

Chapter 28 | LLDP Commands
– 781 –
Neither the IPv4 address nor the IPv6 address of a VLAN interface is configured.
The CPU MAC address (or device MAC address) will be sent in the Management
Address TLV of the LLDP PDU transmitted.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv management-ipv6-address
Console(config-if)#
lldp basic-tlv
port-description
This command configures an LLDP-enabled port to advertise its port description.
Use the no form to disable this feature.
Syntax
[no] lldp basic-tlv port-description
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
The port description is taken from the ifDescr object in RFC 2863, which includes
information about the manufacturer, the product name, and the version of the
interface hardware/software.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp basic-tlv port-description
Console(config-if)#
lldp basic-tlv
system-capabilities
This command configures an LLDP-enabled port to advertise its system
capabilities. Use the no form to disable this feature.
Syntax
[no] lldp basic-tlv system-capabilities
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)