CLI Reference Guide-R04

Chapter 4 | System Management Commands
Banner Information
– 109 –
Example
Console(config)#banner configure lp-number 12
Console(config)#
banner configure
manager-info
This command is used to configure the manager contact information displayed in
the banner. Use the no form to restore the default setting.
Syntax
banner configure manager-info
name1 mgr1-name phone-number mgr1-number
[name2 mgr2-name phone-number mgr2-number |
name3 mgr3-name phone-number mgr3-number]
no banner configure manager-info [name1 | name2 | name3]
name1 mgr1-name - The name of the first manager.
phone-number mgr1-number - The phone number of the first manager.
name2 mgr2-name - The name of the second manager.
phone-number mgr2-number - The phone number of the second
manager.
name3 mgr3-name - The name of the third manager.
phone-number mgr3-number - The phone number of the third manager.
Maximum length of each parameter: 32 characters
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure manager-info
command interprets spaces as data input boundaries. The use of underscores ( _ )
or other unobtrusive non-letter characters is suggested for situations where white
space is necessary for clarity.
Example
Console(config)#banner configure manager-info name1 Albert_Einstein phone-
number 123-555-1212 name2 Lamar phone-number 123-555-1219
Console(config)#