CLI Reference Guide-R04

Chapter 4 | System Management Commands
System Status
– 118 –
Console#show running-config
Building startup configuration. Please wait...
!<stackingDB>00</stackingDB>
!<stackingMac>01_00-e0-0c-00-00-fd_00</stackingMac>
!
snmp-server community public ro
snmp-server community private rw
!
enable password 7 1b3231655cebb7a1f783eddf27d254ca
!
vlan database
VLAN 1 name DefaultVlan media ethernet
!
spanning-tree mst configuration
!
interface vlan 1
ip address dhcp
.
.
.
interface ethernet 1/28
capabilities 10full
capabilities 100full
capabilities 1000full
!
interface ethernet 1/1
interface vlan 1
ipv6 enable
ipv6 address 2001:db8:2222:7272::/64
ipv6 address fe80::260:3eff:fe11:6700 link-local
!
ipv6 default-gateway 2001:db8:2222:7272::254
.
.
.
!
line console
!
line vty
!
end
!
Console#
Related Commands
show startup-config (118)
show startup-config This command displays the configuration file stored in non-volatile memory that is
used to start up the system.
Command Mode
Privileged Exec
Command Usage
◆ Use this command in conjunction with the show running-config command to
compare the information in running memory to the information stored in non-
volatile memory.