CLI Reference Guide-R04

Chapter 4 | System Management Commands
File Management
– 133 –
Command Usage
◆ If you enter the command dir without any parameters, the system displays all
files.
◆ A colon (:) is required after the specified unit number.
File information is shown below:
Example
The following example shows how to display all file information:
Console#dir
File Name Type Startup Modified Time Size (bytes)
------------------------------ ------- ------- ------------------- ------------
Unit 1:
ecs4120-run-v1.0.2.43.bix OpCode Y 2018-05-02 07:16:54 19215988
Factory_Default_Config.cfg Config N 2018-04-07 03:59:20 455
startup1.cfg Config Y 2018-04-05 02:33:57 1496
-------------------------------------------------------------------------------
Free space for compressed user config files: 30281728
Total space: 256 MB
Console#
whichboot This command displays which files were booted when the system powered up.
Syntax
whichboot
Default Setting
None
Command Mode
Privileged Exec
Table 18: File Directory Information
Column Heading Description
File Name The name of the file.
Type File types: Boot-Rom, Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Modified Time The date and time the file was last modified.
Size The length of the file in bytes.