CLI Reference Guide-R04

Chapter 4 | System Management Commands
Line
– 149 –
ansi-bbs - ANSI-BBS
vt-100 - VT-100
vt-102 - VT-102
width width - The number of character columns displayed on the terminal.
(Range: 0-80)
Default Setting
Escape Character: 27 (ASCII-number)
History: 10
Length: 24
Terminal Type: VT100
Width: 80
Command Mode
Privileged Exec
Example
This example sets the number of lines displayed by commands with lengthy output
such as show running-config to 48 lines.
Console#terminal length 48
Console#
show line This command displays the terminal line’s parameters.
Syntax
show line [console | vty]
console - Console terminal line.
vty - Virtual terminal for remote console access (i.e., Telnet).
Default Setting
Shows all lines
Command Mode
Normal Exec, Privileged Exec
Example
To show all lines, enter this command:
Console#show line
Terminal Configuration for this session:
Length : 24
Width : 80
History Size : 10
Escape Character(ASCII-number) : 27