CLI Reference Guide-R04

Chapter 4 | System Management Commands
Time
– 169 –
Related Commands
ntp client (167)
show ntp (169)
show ntp This command displays the current time and configuration settings for the NTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for sending time
synchronization requests, and the current NTP mode (i.e., unicast).
Example
Console#show ntp
Console#show ntp
Current Time : Aug 17 11:35:02 2018
Current Mode : unicast
NTP Status : Enabled
NTP Authenticate Status : Enabled
NTP Server 192.168.3.30 version 4
NTP Server 192.168.3.33 version 4
NTP Server 3ffe:3328:5:1:2a0:24ff:fe4b:74a8 version 4
NTP Authentication Key 19 md5 019R65R3327Q1224282703J282424141306M2213
NTP Authentication Key 45 md5 72P36P71R65V5930Q73Q6317747M6K1
Console#
Manual Configuration Commands
clock summer-time
(date)
This command sets the start, end, and offset times of summer time (daylight
savings time) for the switch on a one-time basis. Use the no form to disable
summer time.
Syntax
clock summer-time name date b-date b-month b-year b-hour b-minute e-date
e-month e-year e-hour e-minute [offset]
no clock summer-time
Note: b-<parameter name> - indicates when to begin the summer time offset
whereas e-<parameter name> - indicates when to end the summer time offset.