CLI Reference Guide-R04

Chapter 4 | System Management Commands
Time Range
– 178 –
time-range This command specifies the name of a time range, and enters time range
configuration mode. Use the no form to remove a previously specified time range.
Syntax
[no] time-range name
name - Name of the time range. (Range: 1-32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆ This command sets a time range for use by other functions, such as Access
Control Lists.
◆ A maximum of eight rules can be configured for a time range.
Example
Console(config)#time-range r&d
Console(config-time-range)#
Related Commands
Access Control Lists (381)
absolute This command sets the absolute time range for the execution of a command. Use
the no form to remove a previously specified time.
Syntax
absolute start hour minute day month year
[end hour minutes day month year]
absolute end hour minutes day month year
no absolute