CLI Reference Guide-R04

Chapter 5 | SNMP Commands
Additional Trap Commands
– 214 –
Command Usage
◆ Once the high watermark is exceeded, utilization must drop beneath the low
watermark before the alarm is terminated, and then exceed the high
watermark again before another alarm is triggered.
◆ Once the maximum threshold is exceeded, utilization must drop beneath the
minimum threshold before the alarm is terminated, and then exceed the
maximum threshold again before another alarm is triggered.
Example
Console(config)#process cpu guard high-watermark 80
Console(config)#process cpu guard low-watermark 60
Console(config)#
Related Commands
show process cpu guard (114)