CLI Reference Guide-R04

Chapter 11 | Interface Commands
Interface Configuration
– 413 –
Example
The following example enables flow control on port 5.
Console(config)#interface ethernet 1/5
Console(config-if)#flowcontrol
Console(config-if)#no negotiation
Console(config-if)#
Related Commands
negotiation (414)
capabilities (flowcontrol, symmetric) (409)
history This command configures a periodic sampling of statistics, specifying the sampling
interval and number of samples. Use the no form to remove a named entry from
the sampling table.
Syntax
history name interval buckets
no history name
name - A symbolic name for this entry in the sampling table. (Range: 1-31
characters)
interval - The interval for sampling statistics. (Range: 1-86400 seconds)
buckets - The number of samples to take. (Range: 1-96)
Default Setting
15min - 900 minute interval, 96 buckets
1day - 86400 minute interval, 7 buckets
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
This example sets a interval of 15 minutes for sampling standard statisical values on
port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#history 15min 15 10
Console(config-if)#