CLI Reference Guide-R04

Chapter 11 | Interface Commands
Interface Configuration
– 426 –
Command Mode
Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the statistics recorded for all named entries in the sampling
table.
Console#show interfaces history ethernet 1/1
Interface : Eth 1/ 1
Name : 15min
Interval : 900 second(s)
Buckets Requested : 96
Buckets Granted : 7
Status : Active
Current Entries
Start Time % Octets Input Unicast Multicast Broadcast
------------ ------ --------------- ------------- ------------- ------------
00d 01:45:01 0.00 105421 688 30 8
Discards Errors Unknown Proto
------------- ------------- -------------
0 0 0
% Octets Output Unicast Multicast Broadcast
------ --------------- ------------- ------------- -------------
0.00 859987 947 373 1
Discards Errors
------------- -------------
0 0
Interface : Eth 1/ 1
Name : 1day
Interval : 86400 second(s)
Buckets Requested : 7
Buckets Granted : 0
Status : Active
Current Entries
Start Time % Octets Input Unicast Multicast Broadcast
------------ ------ --------------- ------------- ------------- ------------
00d 00:00:00 0.00 969845 6548 237 82
Discards Errors Unknown Proto
------------- ------------- -------------
7 0 0
% Octets Output Unicast Multicast Broadcast
------ --------------- ------------- ------------- -------------
0.00 8455699 9101 3146 3
Discards Errors
------------- -------------
0 0