CLI Reference Guide-R04

Chapter 12 | Link Aggregation Commands
Trunk Status Display Commands
– 458 –
Console#show lacp sysid
Port Channel System Priority System MAC Address
-------------------------------------------------------------------------
1 32768 00-30-F1-8F-2C-A7
2 32768 00-30-F1-8F-2C-A7
3 32768 00-30-F1-8F-2C-A7
4 32768 00-30-F1-8F-2C-A7
5 32768 00-30-F1-8F-2C-A7
6 32768 00-30-F1-8F-2C-A7
7 32768 00-30-F1-D4-73-A0
8 32768 00-30-F1-D4-73-A0
9 32768 00-30-F1-D4-73-A0
10 32768 00-30-F1-D4-73-A0
11 32768 00-30-F1-D4-73-A0
12 32768 00-30-F1-D4-73-A0
.
.
.
show port-channel
load-balance
This command shows the load-distribution method used on aggregated links.
Command Mode
Privileged Exec
Example
Console#show port-channel load-balance
Trunk Load Balance Mode: Source and destination IP address
Console#
Partner Admin Key Current administrative value of the Key for the protocol partner.
Partner Oper Key Current operational value of the Key for the protocol partner.
Partner Admin Key Administrative values of the partner’s state parameters. (See preceding table.)
Partner Admin Key Operational values of the partner’s state parameters. (See preceding table.)
Table 81: show lacp sysid - display description
Field Description
Port Channel The switch physical port number.
System Priority
*
* The LACP system priority and system MAC address are concatenated to form the LAG system ID.
LACP system priority for this channel group.
System MAC
Address*
System MAC address.
Table 80: show lacp neighbors - display description (Continued)
Field Description