CLI Reference Guide-R04

Chapter 18 | Smart Pair Commands
Smart Pair Concept
– 508 –
Command Mode
Global Configuration
Command Usage
Use the command to create a new smart pair or to enter the smart-pair
configuration mode of an existing smart pair.
Example
Console(config)#smart-pair 1
Console(config-smart-pair)#
smart-pair restore Use the smart-pair restore command to manually restore traffic to the primary port
of a specified smart pair.
Syntax
smart-pair restore ID
ID - Identification Number. (Range: 1-1000)
Default Setting
None
Command Mode
Privileged Exec.
Command Usage
The link of the primary port must be in the up condition for the command to
succeed.
Example
Console#smart-pair restore 1
Console#
primary-port This command configures the primary port of a specified smart pair. Use the no
form of the command to remove the configured primary port from the smart pair.