CLI Reference Guide-R04

Chapter 19 | TWAMP Commands
– 514 –
Example
Console(config)#twamp reflector
Console(config)#
twamp reflector
refwait
This command sets the TWAMP session timeout on the switch. Use the no form to
restore the default.
Syntax
twamp reflector refwait seconds
no twamp reflector refwait
seconds - The timeout value in seconds. (Range: 30-3600)
Default Setting
900 seconds
Command Mode
Global Configuration
Command Usage
The Session-Reflector will discontinue any session that has been started when no
packet associated with that session has been received for the timeout period.
Example
Console(config)#twamp reflector refwait 300
Console(config)#
show twamp reflector This command shows the configured TWAMP Reflector settings and sessions on
the switch.
Command Mode
Privileged Exec
Example
Console#show twamp reflector
TWAMP Reflector Status: Enabled
TWAMP Reflector REFWAIT: 900 seconds
TWAMP Reflector Mode: Unauthenticated
Total number of sessions: 0
Sender Address Sender Port Reflector Address Reflector Port
----------------- ----------- ------------------- --------------
Console#