CLI Reference Guide-R04

Chapter 21 | ERPS Commands
– 549 –
erps vlan-group This command creates or modifies an ERPS VLAN group. Use the no form of this
command to remove VLANs from a VLAN group or to delete a VLAN group.
Syntax
erps vlan-group vlan-group-name {add|remove} vlan-list
no erps vlan-group vlan-group-name
vlan-group-name – Name of the VLAN group. (Range: 1-12 characters).
add – Adds VLANs to a group.
remove – Deletes VLANs from a group.
vlan-list – A single VLAN ID, a list of VLAN IDs separated by commas, or a
range of VLANs defined by two VLAN IDs separated by a hyphen.
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆ A set of VLANs in an Ethernet ring can be grouped into several subsets and
applied to an ERPS instance.
◆ A VLAN group configuration is allowed to be deleted only if all associations are
removed.
Example
Console(config)#erps vlan-group alpha add 2
Console(config)#
erps ring This command creates a physical ERPS ring and enters ERPS configuration mode for
the specified ring. Use the no form to delete a physical ring.
Syntax
[no] erps ring ring-name
ring-name - Name of a specific ERPS ring. (Range: 1-12 characters)
Default Setting
None
Command Mode
Global Configuration