CLI Reference Guide-R04

Chapter 23 | Class of Service Commands
Priority Commands (Layer 2)
– 631 –
Example
The following example shows how to set a default priority on port 3 to 5:
Console(config)#interface ethernet 1/3
Console(config-if)#switchport priority default 5
Console(config-if)#
Related Commands
show interfaces switchport (429)
show queue mode This command shows the current queue mode.
Syntax
show queue mode [ethernet unit/port]
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show queue mode
Unit Port queue mode
---- ---- ---------------
1 1 Weighted Round Robin
.
.
.
show queue weight This command displays the weights used for the weighted queues.
Syntax
show queue weight [ethernet unit/port]
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
Default Setting
None