Manualshelf

CLI Reference Guide-R04

ManualsBrandsEdgecore Networks ManualsFixed Broadband AccessENHANCED TEMPERATURE L2+ GIGABIT ETHERNET ACCESS / AGGREGATION SWITCH WITH 4 X 10G UPLINKS
701702703704705706707708709710
Table Of Contents
Chapter 25
| Multicast Filtering Commands
IGMP Filtering and Throttling
– 701 –
show ip igmp igmp-
with-pppoe
This command displays the IGMP PPPoE protocol configuration.
Syntax
show ip igmp igmp-with-pppoe
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip igmp igmp-with-pppoe
Recognize IGMP with PPPoE header : Enabled
Console(config)#
show ip igmp profile This command displays IGMP filtering profiles created on the switch.
Syntax
show ip igmp profile [profile-number]
profile-number - An existing IGMP filter profile number.
(Range: 1-4294967295)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip igmp profile
IGMP Profile 1
Deny
Range 224.1.1.1 224.1.1.2
Range 224.1.2.1 224.1.2.1
IGMP Profile 2
Deny
Range 224.1.1.1 224.1.1.2
Console#show ip igmp profile 1
IGMP Profile 1
Deny
Range 224.1.1.1 224.1.1.2
Range 224.1.2.1 224.1.2.1
Console#