CLI Reference Guide-R04

Chapter 25 | Multicast Filtering Commands
IGMP Filtering and Throttling
– 702 –
show ip igmp
query-drop
This command shows if the specified interface is configured to drop IGMP query
packets.
Syntax
show ip igmp query-drop [interface [interface]]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-10/28)
port-channel channel-id (Range: 1-24)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Using this command without specifying an interface displays all interfaces.
Example
Console#show ip igmp query-drop interface ethernet 1/1
Ethernet 1/1: Enabled
Console#
show ip igmp throttle
interface
This command displays the interface settings for IGMP throttling.
Syntax
show ip igmp throttle interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-26)
Default Setting
None
Command Mode
Privileged Exec