CLI Reference Guide-R04

Chapter 25 | Multicast Filtering Commands
MVR for IPv4
– 739 –
clear mvr groups
dynamic
This command clears multicast group information dynamically learned through
MVR.
Syntax
clear mvr groups dynamic [domain-id]
domain-id - The MVR domain ID - Range: 1-5
Command Mode
Privileged Exec
Command Usage
This command only clears entries learned though MVR. Statically configured
multicast address are not cleared.
Example
Console#clear mvr groups dynamic
Console#
clear mvr statistics This command clears MVR statistics.
Syntax
clear mvr statistics [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28)
port-channel channel-id (Range: 1-26)
vlan vlan-id - VLAN identifier (Range: 1-4094)
Command Mode
Privileged Exec
Example
Console#clear mvr statistics
Console#