CLI Reference Guide-R04

Chapter 25 | Multicast Filtering Commands
MVR for IPv6
– 751 –
mvr6 associated-
profile
This command binds the MVR6 group addresses specified in a profile to an MVR6
domain. Use the no form of this command to remove the binding.
Syntax
[no] mvr6 domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR6 group
addresses. (Range: 1-21 characters)
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
MRV6 domains can be associated with more than one MVR6 profile. But since MVR6
domains cannot share the group range, an MRV6 profile can only be associated
with one MVR6 domain.
Example
The following an MVR6 group address profile to domain 1:
Console(config)#mvr6 domain 1 associated-profile rd
Console(config)#
mvr6 domain This command enables Multicast VLAN Registration for IPv6 (MVR6) for a specific
domain. Use the no form of this command to disable MVR6 for a domain.
Syntax
[no] mvr6 domain domain-id
domain-id - An independent multicast domain. (Range: 1-5)
show mvr6 members Shows information about the current number of entries in the
forwarding database, or detailed information about a specific
multicast address
PE
show mvr6 profile Shows all configured MVR profiles PE
show mvr6 statistics Shows MVR protocol statistics for the specified interface PE
Table 144: Multicast VLAN Registration for IPv6 Commands (Continued)
Command Function Mode