Manualshelf

CLI Reference Guide-R04

ManualsBrandsEdgecore Networks ManualsFixed Broadband AccessENHANCED TEMPERATURE L2+ GIGABIT ETHERNET ACCESS / AGGREGATION SWITCH WITH 4 X 10G UPLINKS
791792793794795796797798799800
Table Of Contents
Chapter 26
| LLDP Commands
– 791 –
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv inventory
Console(config-if)#
lldp med-tlv location This command configures an LLDP-MED-enabled port to advertise its location
identification details. Use the no form to disable this feature.
Syntax
[no] lldp med-tlv location
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises location identification details.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp med-tlv location
Console(config-if)#
lldp med-tlv med-cap This command configures an LLDP-MED-enabled port to advertise its Media
Endpoint Device capabilities. Use the no form to disable this feature.
Syntax
[no] lldp med-tlv med-cap
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises LLDP-MED TLV capabilities, allowing Media Endpoint and
Connectivity Devices to efficiently discover which LLDP-MED related TLVs are
supported on the switch.