CLI Reference Guide-R04

Chapter 30 | DHCP Commands
DHCP Server
– 886 –
Command Mode
DHCP Pool Configuration
Example
Console(config-dhcp)#next-server 10.1.0.21
Console(config-dhcp)#
Related Commands
bootfile (878)
clear ip dhcp binding This command deletes an automatic address binding from the DHCP server
database.
Syntax
clear ip dhcp binding {address | * }
address - The address of the binding to clear.
* - Clears all automatic bindings.
Default Setting
None
Command Mode
Privileged Exec
Usage Guidelines
◆ An address specifies the client’s IP address. If an asterisk (*) is used as the
address parameter, the DHCP server clears all automatic bindings.
◆ Use the no host command to delete a manual binding.
◆ This command is normally used after modifying the address pool, or after
moving DHCP service to another device.
Example.
Console#clear ip dhcp binding *
Console#
Related Commands
show ip dhcp binding (887)