CLI Reference Guide-R04

Chapter 30 | DHCP Commands
DHCP Dynamic Provisioning
– 888 –
Default Setting
None
Command Mode
Privileged Exec
Example
Console#show ip dhcp pool
Pool name : R&D
Pool type : Network
Network address : 192.168.0.1
Subnet mask : 255.255.255.0
Boot file :
Client identifier mode : Hex
Client identifier :
Default router : 0.0.0.0
0.0.0.0
DNS server : 0.0.0.0
0.0.0.0
Domain name :
Hardware type : None
Hardware address : 00-00-00-00-00-00
Lease time : infinite
Netbios name server : 0.0.0.0
0.0.0.0
Netbios node type : Hybrid
Next server : 0.0.0.0
Console#
DHCP Dynamic Provisioning
Dynamic provision configures the switch to use the configuration file specified in
DHCP/DHCPv6 packet. An administrator can change the configuration file on the
server such that the switch can automatically update to the latest configuration file.
In this way an administrator can easily maintain configuration files for all devices.
Use the commands in this section to allow the switch to dynamically acquire the
configuration file information.
Table 173: DHCP Client Commands
Command Function Mode
Dynamic Provisioning using DHCP
ip dhcp dynamic-provision Specifies the DHCP client identifier for an interface IC
show ip dhcp dynamic-
provision
Submits a BOOTP or DHCP client request PE
Dynamic Provisioning using DHCP