CLI Reference Guide-R04

Chapter 3 | General Commands
– 93 –
reload regularly A specific time of the day at which to always reload the
switch.
hour - The hour at which to reload. (Range: 0-23)
minute - The minute at which to reload. (Range: 0-59)
period - Indicates to reload regularly only on the specified days.
daily - everyday
weekly day-of-week - a specified day of the week at which to reload
regularly.
(Range: monday ... saturday)
monthly day-of-month - a specified day of the month at which to reload
regularly. (Range: 1-31)
reload cancel - Cancels the specified reload option.
Default Setting
None
Command Mode
Global Configuration
Command Usage
◆ This command resets the entire system.
◆ Any combination of reload options may be specified. If the same option is re-
specified, the previous setting will be overwritten.
◆ When the system is restarted, it will always run the Power-On Self-Test. It will
also retain all configuration information stored in non-volatile memory by the
copy running-config startup-config command (See “copy” on page 128).
Example
This example shows how to reset the switch after 30 minutes:
Console(config)#reload in minute 30
***
*** --- Rebooting at January 1 02:10:43 2015 ---
***
Are you sure to reboot the system at the specified time? <y/n>
enable This command activates Privileged Exec mode. In privileged mode, additional
commands are available, and certain commands display additional information.
See “Understanding Command Modes” on page 82.