CLI Reference Guide-R04

Table Of Contents
Glossary
– 966 –
IGMP Snooping Listening to IGMP Query and IGMP Report packets transferred between IP Multicast Routers
and IP Multicast host groups to identify IP Multicast group members.
In-Band Management Management of the network from a station attached directly to the network.
IP Multicast Filtering A process whereby this switch can pass multicast traffic along to participating hosts.
IP Precedence The Type of Service (ToS) octet in the IPv4 header includes three precedence bits defining
eight different priority levels ranging from highest priority for network control packets to
lowest priority for routine traffic. The eight values are mapped one-to-one to the Class of
Service categories by default, but may be configured differently to suit the requirements for
specific network applications.
LACP Link Aggregation Control Protocol. Allows ports to automatically negotiate a trunked link
with LACP-configured ports on another device.
Layer 2 Data Link layer in the ISO 7-Layer Data Communications Protocol. This is related directly to
the hardware interface for network devices and passes on traffic based on MAC addresses.
Link Aggregation See Port Trunk.
LLDP Link Layer Discovery Protocol is used to discover basic information about neighboring
devices in the local broadcast domain by using periodic broadcasts to advertise information
such as device identification, capabilities and configuration settings.
MD5 MD5 Message-Digest is an algorithm that is used to create digital signatures. It is intended
for use with 32 bit machines and is safer than the MD4 algorithm, which has been broken.
MD5 is a one-way hash function, meaning that it takes a message and converts it into a
fixed string of digits, also called a message digest.
MIB Management Information Base. An acronym for Management Information Base. It is a set of
database objects that contains information about a specific device.
MRD Multicast Router Discovery is a A protocol used by IGMP snooping and multicast routing
devices to discover which interfaces are attached to multicast routers. This process allows
IGMP-enabled devices to determine where to send multicast source and group
membership messages.