ENGINEERING RELEASE NOTES Firmware Version 1.2.2.30 INTRODUCTION: ECS4120 series Gigabit Access Switch consists of ECS4120-28T, ECS4120-52T which configuration is 24/48 10/100/1000 Base-T ports, with additional 4 10G SFP+ ports while ECS4120-28F which configuration is 20 GE SFP & 4 Combo GE ports with additional 4 10G SFP+ ports.
ENGINEERING RELEASE NOTES Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Patch Version Previous Version Previous Version Previous Version Previous Version Previous Ver
ENGINEERING RELEASE NOTES HARDWARE COMPATIBILITY: ES4528BH2-HPoE-EC BOOTPROM COMPATIBILITY: ALL INSTALLATION AND CONFIGURATION NOTES: In general, the ECS4120 series Switch will be shipped to you pre-configured with this version of firmware. If you would like to upgrade an existing ECS4120 series Switch, please follow the TFTP download instructions that are included with your firmware image upgrade kit.
ENGINEERING RELEASE NOTES Add debug method for 3M issue (switch reboots by software watchdog L2MUX_GROUP) Runtime V1.2.2.27 ES4528BH2-HPoE-0815-EC-00949 [Enhancement] Enhance PPPoe IA to Support PPPoe Snooping ES4528BH2-HPoE-0815-EC-00948 VLAN translation cannot separate ingress & egress direction ES4528BH2-HPoE-0815-EC-00946 [Enhancement] Support DHCPSNP filter-only mode ES4528BH2-HPoE-0815-EC-00944 Keeping "show interface transceiver" will trigger the software watchdog.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00908 MAC address of vlans are which are not in the allowed vlans list , are still being learned on the eth ports Runtime V1.2.2.23; Loader V0.0.4.0/0.0.3.0 (latest code from server) ECS4120-Stacking-00143 RSTP: DUT does not reject to configure RSTP mode as spanning-tree is disabled ECS4120-Stacking-00144 ES4528BH2-HPoE-0815-EC-00900 ES4528BH2-HPoE-0815-EC-00905 ECS4120-Stacking-00145 ES4528BH2-HPoE-0815-EC-00711 ES4528BH2-HPoE-0815-EC-00864 Loader V0.0.4.
ENGINEERING RELEASE NOTES ECS4120-Stacking-00128 ECS4120-Stacking-00121 Loop detection: After we blobal enable loop detection in Master switch; CLI is halted and DUT rebooting itself.. Wrong password is saved to Mozilla Firefox web browser Runtime V1.2.2.18; Loader V0.0.3.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00849 ES4528BH2-HPoE-0815-EC-00808 ERPS: After shutdown and no shutdown Ring port in maximum instance setting; Port cannot receive all VLAN traffic. ERPS WTR timer should support range 1 - 12 minutes ES4528BH2-HPoE-0815-EC-00790 DHCP Snooping trust port will remove the option 82..
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00176 StaticRoute: Static route doesn't support MIB.. Runtime V1.2.2.12; Loader V0.0.3.0 ES4528BH2-HPoE-0815-EC-00824 Load runtime to ECS4120-28F, the port status always shows link down. shutdown port via port security then DRIVER_GROUP_TX counter increase ES4528BH2-HPoE-0815-EC-00823 and cause watchdog reboot Runtime V1.2.2.10; Loader V0.0.3.
ENGINEERING RELEASE NOTES 802.1ag-CFM-1170: TG1 will received tagged packets when Transmit LTM with MEP_2 destination address from DUT1PA [enhance] remove the setting of /127 Management vlan interface IPv6/v6 ES4528BH2-HPoE-0815-EC-00729 support MLDv1/v2 report/leave problem(33:33:00:00:00:01-02), L2/L3 table ES4528BH2-HPoE-0815-EC-00684 issue MLDSNP: Multicast data can not flood to other ports even MLDSNP is ES4528BH2-HPoE-0815-EC-00353 disabled. ES4528BH2-HPoE-0815-EC-00743 Runtime V1.2.2.6; Loader V0.0.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00704 [Enhancement] add sw-tx-disable workaround. Can't apply ERPS settings when unchecking the box "Admin Status ES4528BH2-HPoE-0815-EC-00732 ENABLE. ES4528BH2-HPoE-0815-EC-00745 Thermal plan apply on ECS4120-28V2-I new layout and ECS4120-28F-I. [12Tv2] Source photonic GPON transceiver (SPS-34-24T-HP-TDFO-RR) ES4528BH2-HPoE-0815-EC-00746 EEPROM info. partially missing or overlapped.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00715 EFM OAM remote-loopback test is abnormal. Runtime V1.2.2.1; Loader V0.0.2.7 ES4528BH2-HPoE-0815-EC-00741 ES4528BH2-HPoE-0815-EC-00737 ES4528BH2-HPoE-0815-EC-00732 ES4528BH2-HPoE-0815-EC-00730 ES4528BH2-HPoE-0815-EC-00729 Avoid new HW to load the old runtime image that is not supported new board id. Get error message when we configure ntp server and client. Can't apply ERPS settings when unchecking the box "Admin Status ENABLE" on web GUI.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00707 switch can't dump exception log & watchdog log via backdoor TFTP upload [Enhancement] new board id for ECS4120-28Fv3-I. ES4528BH2-HPoE-0815-EC-00705 [WEB] There is no place to configure ERPS VLAN-inclusion or exclusion.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00677 MLD snooping: do not flood ipv6 multicast traffic even disabling MDL snooping. After reboot LAG not calculate on MSTP ES4528BH2-HPoE-0815-EC-00642 MVR: Inject IGMP report overnight, DUT will auto reboot. ES4528BH2-HPoE-0815-EC-00641 IGMP-Snooping: The unregistered group will be forwarded. ES4528BH2-HPoE-0815-EC-00624 DHCP-SNP: The log format is incorrect as DUT failed to find egress port.
ENGINEERING RELEASE NOTES incorrect. ES4528BH2-HPoE-0815-EC-00659 WebAuth: The webauth function is failure. ES4528BH2-HPoE-0815-EC-00654 HP-NNMI MIB compiler error. ES4528BH2-HPoE-0815-EC-00653 add missing value for fileCopyDestOperType in MIB file 1QVLAN: DUT does not reject to delete the native VLAN by WEB, it cause PC ES4528BH2-HPoE-0815-EC-00648 cannot ping to DUT. MLDSNP-proxy: Received query from mrouter port would be flooded to ES4528BH2-HPoE-0815-EC-00636 other ports when IPv6 is enabled.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00615 Default configure each interface will be set to "ethernet cfm port-enable" ES4528BH2-HPoE-0815-EC-00618 interface vlan IP(vlan 96) did not send the arp reply.. ES4528BH2-HPoE-0815-EC-00629 [Enhancement] Support Active/Standby static LAG DDoS: The default priority is not modifying when the port had once the ES4528BH2-HPoE-0815-EC-00630 authenticated. Runtime V1.0.2.39; Loader V0.0.2.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00528 [Enhancement] Banner support 2048 characters ES4528BH2-HPoE-0815-EC-00456 [Enhancement] Maximum number of IGMP snooping group support to 1024. ES4528BH2-HPoE-0815-EC-00459 RSTP path cost will be fixed when static port-channel link up/down.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00518 switch dropped RSVP PATH packets. Runtime V1.0.2.32; Loader V0.0.2.6 build en-us image (English Web interface) and remove zh-cn in this version. Update the oid of 28Fv2–I model in adpt.h (RD internal) Runtime V1.0.2.31; Loader V0.0.2.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00359 After reload , CPU Utilization incorrect bigger than 800M ES4528BH2-HPoE-0815-EC-00411 Non-UDP multicast packet will flooding ES4528BH2-HPoE-0815-EC-00386 new 28F Diag Suuport for LED , reset button test (support ECS4120-28Fv2) Runtime V1.0.2.23; Loader V0.0.2.
ENGINEERING RELEASE NOTES Runtime V1.0.2.19; Loader V0.0.2.6 ES4528BH2-HPoE-0815-EC-00314 SNMP: Use SNMP get some MIB object, DUT return incorrect value. ES4528BH2-HPoE-0815-EC-00347 rate limit input works incorrect. ES4528BH2-HPoE-0815-EC-00354 Mib compile error Runtime V1.0.2.18; Loader V0.0.2.6 ES4528BH2-HPoE-0815-EC-00331 switch didn't forward General Query to client.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00297 Enhancement OAM IEEE 802.3ah EFM. Runtime V1.0.2.12; Loader V0.0.2.6 ES4528BH2-HPoE-0815-EC-00266 Add ERPS and CFM. ES4528BH2-HPoE-0815-EC-00273 change EEE default to disable. Runtime V1.0.2.11; Loader V0.0.2.6 ECS4120-28F media-type sfp-forced 100fx after reboot will linkup as 1000full.. ECS4120-28T/F 10G port(1/25-28) could not linkup on 1G speed with ES4528BH2-HPoE-0815-EC-00272 ECS4210 series 1G SFP port.. ES4528BH2-HPoE-0815-EC-00270 Runtime V1.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00257 switch default value : ingress-filtering should be disabled ES4528BH2-HPoE-0815-EC-00258 Interface > Port > History --> no unit of measure ES4528BH2-HPoE-0815-EC-00259 ECS4120-28F 1G SFP failed to linkup on 1G port ES4528BH2-HPoE-0815-EC-00260 remove IEEE 802.1ag (CFM) and ERPS ES4528BH2-HPoE-0815-EC-00263 [Fan] Implement new thermal plan Runtime V1.0.2.9; Loader V0.0.2.6 ES4528BH2-HPoE-0815-EC-00042 enhancement 8032 ERPS 802.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00125 Time-Range: Perodic rule can't be saved properly. Spanning-tree: When we loop the Ports of DUT, this spanning-tree status is ES4528BH2-HPoE-0815-EC-00134 wrong. Spanning-tree: When DUT detect spanning-tree loop-detection, it cannot ES4528BH2-HPoE-0815-EC-00135 detect traffic loops which happened on other ports. ES4528BH2-HPoE-0815-EC-00145 CoS: Change phb-queue is not working.
ENGINEERING RELEASE NOTES DHCP-SNP: DUT should limit the DHCP Snooping maximum binding number; and it should drop unnecessary DHCP-Request packets. ES4528BH2-HPoE-0815-EC-00108 ACL: 802.3 filter in MAC ACL in egress directon is useless.. ES4528BH2-HPoE-0815-EC-00095 ES4528BH2-HPoE-0815-EC-00109 ACL: IP ACL is useless when packets are filtered by MAC ACL first. IGMP-Filter: Create IGMP profile with multiple range entry, it will merge to ES4528BH2-HPoE-0815-EC-00115 incorrect entry.
ENGINEERING RELEASE NOTES ES4528BH2-HPoE-0815-EC-00048 Enhancement support ipv4 & ipv6 static routing WebAuth:Cannot open the web authentication page when user login the ES4528BH2-HPoE-0815-EC-00052 web management from https protocol. ES4528BH2-HPoE-0815-EC-00053 Web: Front panel and System Switch page are wrong on WebUI.
ENGINEERING RELEASE NOTES KNOWN RESTRICITIONS AND LIMITATIONS: Support one group for PORT MIRROR, and support one group for RSPAN. PORT MIRROR and RSPAN is mutually exclusive. SFP(ECS4120-28F) model, there is no SFP information from port 1 to port 24. not support sfp-preferred-auto in ECS4120 28F IGMP group is 255 but ASIC vendor data sheet described is 256 because 1 group is reserved by default. efm oam remote-loopback test but not receive the loopback test packet when spanning tree status is block.