ECS4120 series V1.2.2.30 firmware release note

ENGINEERING RELEASE NOTES
1/2010 Subject to Change Without Notice Page: 16 of 25
ES4528BH2-HPoE-0815-EC-00528
[Enhancement] Banner support 2048 characters
ES4528BH2-HPoE-0815-EC-00456
[Enhancement] Maximum number of IGMP snooping group support to 1024.
ES4528BH2-HPoE-0815-EC-00459
RSTP path cost will be fixed when static port-channel link up/down.
ES4528BH2-HPoE-0815-EC-00525
static mac was deleted when switch enabled IPSG mac mode and receive
DHCP release packet
ES4528BH2-HPoE-0815-EC-00528
[enhanement] Banner support 2048 characters
ES4528BH2-HPoE-0815-EC-00530
Switch did not write the ARP entry when user access to switch via craft port.
ES4528BH2-HPoE-0815-EC-00531
TACACS accounting:dut didnot suport "show authorization exec"
ES4528BH2-HPoE-0815-EC-00534
remove accton string when boot up
ES4528BH2-HPoE-0815-EC-00536
Traffic control min threshold is 500 pps, we want minimal value possible be
lower, in example down to 10 pps
ES4528BH2-HPoE-0815-EC-00539
Europe summer time end date is incorrect
ES4528BH2-HPoE-0815-EC-00541
change spanning-tree mode will make the traffic stop.
ES4528BH2-HPoE-0815-EC-00543
Fail to telnet EC switch(ECS4120) from Cisco device
ES4528BH2-HPoE-0815-EC-00544
sflow packet agent address display wrong.
ES4528BH2-HPoE-0815-EC-00545
switch could still learn the mac-address which belong none-vlan member
even if enable the ingress filtering.
ES4528BH2-HPoE-0815-EC-00547
sflow sample packet doesn't include IPv4 information.
ES4528BH2-HPoE-0815-EC-00548
Failed to set the TACACS+ server for aaa accounting dot1x.
ES4528BH2-HPoE-0815-EC-00546
[Enhancement] ECS4120 support 2.5G transceiver on the 10G uplink port
ES4528BH2-HPoE-0815-EC-00566
LACP: The ingress Filter is failed when meets specific packets
ES4528BH2-HPoE-0815-EC-00588
[Enhancement] Support read Total/Dynamic/Static mac count by SNMP
ES4528BH2-HPoE-0815-EC-00599
[Enhancement] unify the design of configuration for jumbo frame
Runtime V1.0.2.35; Loader V0.0.2.6
ES4528BH2-HPoE-0815-EC-00449
FAN control for new model 28F-I ,28F-V2 and 28FV2-I.
ES4528BH2-HPoE-0815-EC-00529
Disable LBD trigger a LBD recover log.
Runtime V1.0.2.34; Loader V0.0.2.6
ES4528BH2-HPoE-0815-EC-00455
[Enhancement] support accounting of commands..
ES4528BH2-HPoE-0815-EC-00521
Update MIB file for create time range from SNMP
ES4528BH2-HPoE-0815-EC-00524
MSTP recovery time is too long 30~50 sec.
Runtime V1.0.2.33; Loader V0.0.2.6
ES4528BH2-HPoE-0815-EC-00364
DoS: Use LOIC to attack port 22, CLI has no response and DUT reboot by
watchdog.
ES4528BH2-HPoE-0815-EC-00448
PPPoEIA can't work with QinQ