ECS4120 series V1.2.2.30 firmware release note

ENGINEERING RELEASE NOTES
1/2010 Subject to Change Without Notice Page: 17 of 25
ES4528BH2-HPoE-0815-EC-00518
switch dropped RSVP PATH packets.
Runtime V1.0.2.32; Loader V0.0.2.6
build en-us image (English Web interface) and remove zh-cn in this version.
Update the oid of 28Fv2–I model in adpt.h (RD internal)
Runtime V1.0.2.31; Loader V0.0.2.6
ES4528BH2-HPoE-0815-EC-00445
STP TCN log format change, and don’t log TC
ES4528BH2-HPoE-0815-EC-00450
[Enhancement] Add board id 9 for 28Fv2-I
ES4528BH2-HPoE-0815-EC-00451
[IGMP filter] the multicast traffic does not match rule, but it still will be
forwarded..
ES4528BH2-HPoE-0815-EC-00466
Link state of LACP trunk member port changes between up and down
repeatedly
ES4528BH2-HPoE-0815-EC-00511
SNMP: The value of OID "lldpRemManAddrIfId" remove ".0" at the end.
ES4528BH2-HPoE-0815-EC-00512
28FV2 enhance function via rx loss singal detection
Runtime V1.0.2.29; Loader V0.0.2.6
build en-us image (English Web interface) and remove zh-cn in this version.
Runtime V1.0.2.28; Loader V0.0.2.6
ES4528BH2-HPoE-0815-EC-00444
enhance: add zh-cn for EC
ES4528BH2-HPoE-0815-EC-00447
10G port does not link-up issue on ECS4120-28F(V1.0.2.26)..
Runtime V1.0.2.27; Loader V0.0.2.6
10G port does not link-up issue on ECS4120-28F(V1.0.2.26)..
Runtime V1.0.2.26; Loader V0.0.2.6
ES4528BH2-HPoE-0815-EC-00441
new oid from EC for each ECS4120 model.
Runtime V1.0.2.25; Loader V0.0.2.6
ES4528BH2-HPoE-0815-EC-00431
There is a typo on the DHCP L3 Relay help page.
Runtime V1.0.2.24; Loader V0.0.2.6