Software Release Note ECS4510 Series ECS4510-28T/28P/28F/52T/52P Ver 0.2 Sep.
Table of Content Revision History ........................................................................................................................................ 3 1. Overview............................................................................................................................................ 4 2. System Versions........................................................................................................................................ 4 3. Fixes ..............
Revision History REVISION DATE CHANGES 0.1 Jun. 23, 2014 Bug Fixed, Enhancement 0.2 Sep.
1. Overview Release Note version 0.2 shows new features and bug fixes mentioned as following table. 2. System Versions No 1 Category Firmware 3. Versions V1.5.2.15 Enhancement / Fixes Firmware Version: 1.5.2.15 / Sep.
For looging send mail, when the hour/min/sec is in single digit, the preceding 0 is dropped Diagnostics LED should be Blinking Amber while a system fan has failed.
41 Fix When changing power between main power supply and redundant power supply, PoE would not provide power 42 Fix When master of stacked switch executes "copy startup running", it hangs and slave reboots 43 Fix It takes long time to save/show config, when ECS4510 series stack with 8 units 44 Fix Watchdog reboots system while show running configuration 45 Fix When stacking, the unit ID is duplicated after assign unit id 46 Fix 1Q VLAN: DUT cannot show all maximum VLANs, and it exits CLI se
59 Fix ECS4510 CPU handle 50+ packets when applying jumbo frame, and CPU is able to handle 250+ packets when disabling jumbo frame 60 Fix The displayed message of traffic-segmentation should not be private vlan. 61 Fix Switch does not have DHCP snooping binding table when DHCP client obtians IP address 62 Fix MAC-base VLAN should dynamically add VID to port interfance Firmware Version: 1.5.2.2 / Jun.