User's Manual

Quick Start Guide

– 2 –

Follow the steps in this guide to install the AP in your network.

Caution:

The planning and installation of the AP requires professional personnel

that are trained in the installation of radio transmitting equipment. The user is

responsible for compliance with local regulations concerning items such as

antenna power, use of lightning arrestors, grounding, and radio mast or tower

construction. Therefore, it is recommended to consult a professional contractor

knowledgeable in local radio regulations prior to equipment installation.

1. Unpack the AP Unpack the AP and check the package contents.

◆ ECWO3300, 4300, or 5300 Series Outdoor Access Point

◆ Pole-mounting kit — includes two steel-band clamps

◆ PoE power injector with power cord — either US, Continental Europe or UK

◆ Documentation —Quick Start Guide and Regulatory and Safety Information

2. Mount the AP After planning your installation, mount the unit on a pole, mast, or tower using the

included two steel-band clamps. Also install the external antennas required for

your wireless service.

Pole Mounting

Feed the steel-band clamps through the

integrated pole-mount bracket points on

the back of the AP.

Fasten the steel-band clamps around the

pole to secure the AP to the pole.