User's Manual

Chapter 24 | Wireless Interface Commands
– 207 –
interface wireless This command enters wireless interface configuration mode.
Syntax
interface wireless <index>
index - The index of the wireless interface. (Range: 0 or 1, where “0” is the
2.4 GHz interface and “1” the 5 GHz interface)
Default Setting
None
assoc- timeout-interval Configures the idle time interval (when no frames
are sent) after which a client is disassociated from
the VAP interface
IC-W-VAP
219
auth- timeout-value Configures the time interval after which clients
must be re-authenticated
IC-W-VAP
220
multicast-enhance Enhances multicast quality for wireless clients IC-W-VAP
220
shutdown Disables the wireless interface IC-W-VAP
221
interfere-chan-recover Rescans channels when interference is detected IC-W
221
antenna-chain Sets the internal antennas to use IC-W
222
long-distance Enables long distance parameter settings IC-W
222
long-distance reference-
data
Computes settings from a distance reference IC-W
223
long-distance slottime Sets the slot time parameter IC-W
223
long-distance
acktimeout
Sets the acknowledge timeout parameter IC-W
224
long-distance
ctstimeout
Sets the CTS timeout parameter IC-W
224
bandwidth-control
downlink
Enables downlink bandwidth control on a VAP
interface
IC-W-VAP
225
bandwidth-control
downlink rate
Sets the downlink bandwidth rate for a VAP
interface
IC-W-VAP
225
bandwidth-control
uplink
Enables uplink bandwidth control on a VAP
interface
IC-W-VAP
226
bandwidth-control
uplink rate
Sets the uplink bandwidth rate for a VAP interface IC-W-VAP
226
show interface wireless Shows the status for the wireless interface Exec
227
show station Shows the wireless clients associated with the
access point
Exec
228
show station statistics Shows traffic statistics for wireless clients associated
with the access point
Exec
229
Table 20: Wireless Interface Commands (Continued)
Command Function Mode Page