User's Manual

C HAPTER 4 | WPS Configuration
PIN Method
– 35 –
3. Wait until the following figure appears. Click Finish to complete the WPS
configuration.
Figure 30: WPS Configuration Completed
PIN METHOD
There are two ways to configure the WPS by PIN method:
1. Enter a PIN into your AP/router device.
2. Enter the PIN from your AP/router device.
The detailed configuration procedures for each method follows.
ENTER A PIN INTO
YOUR
AP/ROUTER
DEVICE
1. Double-click the WPS icon on the desktop to open the WPS Utility. You
will see the welcome screen, as shown in Figure 28 on page 34.
2. Click Next to continue. The “Join a Wireless Network” screen displays,
as shown in Figure 31 on page 36.
3. Select the second option, “Enter a PIN into my access point or a
registrar.” You will see the PIN value of the adapter displayed, which is
randomly generated. Click Next.