User's Manual

ManualsBrandsEdgecore Networks ManualsElectronicsIEEE 802.11a/b/g/n Enterprise Access Point

– 1 –

Quick Start Guide

IEEE 802.11a/b/g/n Enterprise Access Point

WAP5110-L

The WAP5110-L is a dual-band IEEE 802.11a/b/g/n access point (AP) that is

designed to deliver high-performance wireless services for clients in an enterprise

environment. Housed in a compact enclosure, the unit includes its own built-in

options for mounting on a wall, or suspended ceiling T-rail. The unit can be

powered through a PoE cable connection from a PoE network switch, or from its AC

power adapter.

In addition, the AP supports network management from an SMC WAC4502 wireless

access controller throught the Control and Provisioning of Wireless Access Points

(CAPWAP) protocol.

OTE

For detailed access point (AP) installation information, refer to the

Installation Guide, which is on the Documentation CD included with the AP.

OTE

For Safety and Regulatory information, refer to the Safety and Regulatory

Information document included with the AP.

E042013-CS-R01

150200000660A

www.smc.com

Summary of content (6 pages)

PAGE 1
Quick Star t Guide IEEE 802.11a/b/g/n Enterprise Access Point WAP5110-L The WAP5110-L is a dual-band IEEE 802.11a/b/g/n access point (AP) that is designed to deliver high-performance wireless services for clients in an enterprise environment. Housed in a compact enclosure, the unit includes its own built-in options for mounting on a wall, or suspended ceiling T-rail. The unit can be powered through a PoE cable connection from a PoE network switch, or from its AC power adapter.
PAGE 2
Quick Start Guide The AP includes its own built-in features for mounting the unit to a wall or suspended ceiling T-rail. Caution: The planning and installation of the AP requires professional personnel that are trained in the installation of radio transmitting equipment. The user is responsible for compliance with local regulations concerning items such as antenna power, use of lightning arrestors, grounding, and radio mast or tower construction.
PAGE 3
Quick Start Guide 1 2 .Mounting on a Ceiling T-rail 1 Position the AP’s ceiling-mount clip holders on either side of the T-rail. 2 Turn the AP until the two clips lock the AP to the T-rail. 3. Connect Cables Connect network cable to the RJ-45 port for your network connection. The RJ-45 port connection can also provide PoE power to the unit. 1 1 Connect Category 5e or better cable to the RJ-45 port.
PAGE 4
Quick Start Guide 4. Connect Power If you do not power the unit using PoE, connect the AC power adapter to the AP and to an AC power source. 1 2 1 Connect the power adapter to the power socket. 2 Connect the power adapter to a nearby AC power source. 5. Verify AP Operation Verify basic AP operation by checking the system LEDs. The Power LED should be on green and the Network LED on or flashing amber.
PAGE 5
Quick Start Guide 6. Connect to the To make initial configuration changes to the AP, connect a PC to the AP’s console Console Port port using the included console cable.
PAGE 6
Quick Start Guide Hardware Specifications Item Specification Chassis Specifications Size W x D x H: 140 x 140 x 47.8 mm (5.51 x 5.51 x 1.88 inches) Weight 500 g (1.10 lbs) Temperature Operating: 0 °C to 40 °C (32 °F to 104 °F) Storage: -20 °C to 70 °C (-4 °F to 158 °F) Humidity Operating: 5% to 95% (non-condensing) Network Interfaces Ports One RJ-45 Port: 1000BASE-T, PoE (PD) 2.4GHz Radio IEEE 802.11b/g/n 5 GHz Radio IEEE 802.11a/n Radio Frequencies 2400 ~ 2483.