Datasheet

3
Datasheet
Intuitive User Interface
The EdgePoint features a graphical
user interface designed for convenient
setup and control. Accessed via a
network port and web browser,
the user-friendly interface provides
intuitive management with a virtual
view of the ports, displaying physical
connectivity, speed, andstatus.
Depending on whether you are
conguring a router (EP-R6 or EP-R8)
or switch (EP-S16), the conguration
interface will differ.
Routing Conguration
The EP-R6 or EP-R8 offers robust
features, including:
• VLAN interfaces for network
segmentation
• Static routes and support of routing
protocols: OSPF, RIP, and BGP
• Firewall policies and NAT rules
• Application identication with Deep
Packet Inspection (DPI)
• DHCP services
• Quality of Service (QoS)
• Network administration and
monitoring tools
• Administrator and operator
accounts
• Comprehensive IPv6 support
Switching Conguration
The EP-S16 provides advanced
features, including:
• MSTP/RSTP/STP
• VLAN, Private VLAN, Voice VLAN
• Link Aggregation
• DHCP Snooping, IGMP Snooping
• TACACS+, RADIUS, 802.1X, MAC
Filtering, ACL
• DiffServ, CoS
• Static Routing, Policy-Based Routing
Conguration by CLI
The CLI provides quick and exible
conguration by command line and
features the following:
• For power users, conguration and
monitoring of all advanced features
• Direct access to standard Linux
tools and shell commands (EP-R6 or
EP-R8 only)
• CLI access through the following:
• Serial console port (EP-R8 or
EP-S16 only)
• SSH
• Telnet
• Graphical user interface (EP-R6 or
EP-R8 only)
For the EP-R8, the Dashboard screen displays detailed statistics: IP information,
MTU, transmit and receive speeds, and status for each interface.
For the EP-R8, the Routing > Routes screen displays static, connected, RIP, and/or
OSFP routes. You can add static routes on this screen.
An industry‑standard command‑line interface (CLI) is available for advanced users.