Quick Start Guide

Accessing the Configuration Interface
The EdgeSwitch Lite is set to DHCP by default, so it will try to
automatically obtain an IP address. If that fails, then it will use
the default fallback IP address, 192.168.1.2. Proceed to the
appropriate section, DHCP or Fallback IP Address:
DHCP
Use one of the following methods:
• Set up the DHCP server to provide a specific IP address to
the EdgeSwitch Lite based on its MAC address (on the label).
• Let the EdgeSwitch Lite obtain an IP address and then
check the DHCP server or UBNT Discovery Tool (available for
download at downloads.ubnt.com) to see which IP address
was assigned.
To log in, follow these steps:
1. Launch your web browser. Type the appropriate IP address
in the address field. Press enter (PC) or return (Mac).
2. The login screen will appear. Enter ubnt in the Username
and Password fields. Click Sign In.