holes on bed frame, or 48 holes 58.5 Inches part, #6 161% Solenoids [G, depending Align Support Beams {2 to gr-d seas Tugging carpel: Next, attach east 3 inches Vertically between Boles. Se Long Scrip (0) 6 Crush Washers (E) and Nuts 81, as re beginning, plate all gates orl fat, gadded dor Headboard (1) to Support Beams (25; @ the holes on Support Beam are on outward on bed frame thickness, along with 2 Small Washers {7}, edge, as shown above, using Medicos A) and Large Washers (8), Recommended shove shove.