Built-In Kegerator ! BR7000SS Fridge for the KC7000SS Kegerator Owner's Manual For more information on other great EdgeStar products on the web, go to http://www, edgestar.
Important Safety Information Improper designed invalidate technical handling can cause serious damage to the EdgeStar kegerator and/or injury to the user. This kegerator is for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other data related to this unit. The unit must be used in a properly grounded wall outlet.
Table of Contents IMPORTANT SAFETY INFORMATION ................................................................. INTRODUCTION ................................................................................................... PARTS IDENTIFICATION ..................................................................................... I 1 2 BACK VIEW .......................................................................................................... 2 FRONT VIEW .....................................
Introduction Thank you for purchasing this EdgeStar kegerator. We are glad you chose us. We believe that your purchase of this product opens a relationship between you and EdgeStar. We will provide the customer support needed to nurture that relationship. This manual contains important information regarding the proper installation, use and maintenance of your kegerator. Following this manual will ensure that your product will work at its peak performance and efficiency.
Parts Identification Front View Control Panel / LED Light Bar im.... / Opening for Dispense Tower Internal Fan with Fan Pipe For Cooling of Dispense Tower m Compressor Step Front Vent i Lock Leveling Foot Can be replaced with casters Back View Product Label Tip: Gather the model and serial number from the product label and write them down before installing kegerator.
Accessories Your kegerator will come with a set of standard accessories. These include a top cover, installation pegs, drip tray, guard rail, handle, casters, and dispense tower screws. The other accessories you receive for the dispense kit and Co2 tank will be based upon the type of kegerator you purchase.
Installing the Kegerator The kegerator should be installed in accordance with local electrical code requirements. The kegerator should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. Before you plug the kegerator into a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor's oils to settle.
Leveling the Kegerator It is important for the kegerator to be leveled in order to work properly. It can be raised or lowered by rotating the plastic sheaths around each of the feet on the bottom of the machine. If you find that the surface is not level, rotate the feet until the kegerator becomes level .You may need to make several adjustments to level it. We recommend using a carpenter's level to check the machine. 1.
Reversing the Door Swing Follow the instructions below to reverse the door swing. IMPORTANT: Before you begin, unplug the refrigerator. To reverse the door from right swing to left swing: 1. Open the door and using a Phillips screwdriver, remove the bottom screws from the lower hinge. ! ! 2. Carefully slide the bottom of the door forward and down, and place it on a padded surface to prevent damaging it. 3. Remove the screws from the upper right hinge.
Free-Standing Installation A free-standing installation will allow you to install the kegerator in almost any place you desire. Please follow the safety information referenced on the Important Safety Information page in this manual. Important Note: • Please refer to the dispense kit installation guide to complete the full assembly of the kegerator. Top Cover Installation The included stainless steel top cover is an optional accessory for use with your kegerator.
Built-In Installation Helpful Guide: • Please visit Kegerator.com to view a detailed video of a built-in installation of this A built-in installation allows the kegerator to be placed under counter. This installation requires several more steps and considerations than a free-standing install. Countertop Opening For Dispense Kit. product. Important • Choose Notes: a location that has ambient temperatures above 50°F and below 95°F.
KEG LOADING • • Half Barrel Keg 5lb. CO2tank • Double Guage Regulator • • • Slim Quarter Keg Sixth Barrel Keg 5lb. CO2tank • Double Guage Regulator • Three Sixth Barrel • Kegs 5lb. CO2 tank _aoooooo_ooeeoo_aoaoooaooogooooeoooooooooooo_ooooo or> OS _ ¢17 • @ o ;;;V ;_aA sl.
OPERATION Installation Check List before Operation 1. Have all packing materials and tape been removed interior and exterior of the kegerator? 2. Have the installation connecting instructions the machine been followed, to electricity? from the including And has proper grounding been installed for the kegerator? 3. Has the machine been leveled? 4.
Normal Sounds Your new kegerator may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor or walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them. • Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of the kegerator can also make noises.
CLEANING AND MAINTENANCE Periodic cleaning and proper maintenance performance, and long life. Exterior will ensure efficiency, top Cleaning The door and cabinet may be cleaned with a mild detergent and lukewarm water solution such as 2 tablespoons of baking soda to 1 quart of water. Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting.
Troubleshooting Issue The kegerator does not turn on. The kegerator will not reach the desired temperature continued Possible cause Solution There is a power failure. Ensure the unit is plugged in and the power outlet has power. The unit is not plugged in. Plug the unit in to a power outlet that has sufficient amperage. A house fuse has blown or the circuit breaker is tripped, Replace the broken fuse in your fuse box or reset the breaker.
Specifications Description of product Model Built-in Kegerator BR7000SS Fridge for the KC7000SS Kegerator Voltage/Frequency AC 115V~60Hz Amperage 1.03A Input Power 120W Color Black Cabinet; Door Storage Capacity Options Refrigerant Temperature Steel 1 Half Barrel Keg 1 Half Barrel Oversized Keg 1 Quarter Barrel Keg 1-3 Sixth Barrel Keg(s) 1-3 Cornelius Keg(s) 1 Slim Quarter Keg with 1 Sixth Barrel Keg R134a, 2.8 oz.
This product is warranted by EdgeStar and is subject to any conditions WHAT IS COVERED: WHAT IS NOT COVEREDcoverage For a period of ONE (1) YEARfrom the date of original retail purchase, EdgeStar will repair or replace any part free of charge including labor that fails due to a defect in materials or workmanship. Labor will be performed free of charge at an authorized EdgeStar repair facility and EdgeStar will supply new, rebuilt, or refurbished parts free of charge.
® EDGES EdgeStar Products 500 N. Capital of TX Hwy, Austin, TX 78746 Bldg 5 Toll Free: 1-866-319-5473 Web: http://www.edgestar.com E-mail: service@edgestar.com Register your product, download owner's manuals, access additional troubleshooting resources, and obtain more information on other great EdgeStar products on the web at: http://www.edgestar.com Product contents Copyright and specifications may change without © 2013 Living Direct, Inc. All rights reserved. notice.
