Beverage Refrigerator BWC120SLD Owner’s Manual For more information on other great EdgeStar products on the web, go to https://www.edgestar.com To use the EdgeStar self-diagnostic tool, go to https://support.edgestar.com V2.
Important Safety Information Improper handling can cause serious damage to the EdgeStar beverage refrigerator and / or injury to the user. This beverage refrigerator is designed for domestic indoor use only. Do not use the unit for industrial or commercial use. Any other use may invalidate the warranty. Please review the ratings label located on the rear panel of the unit for electrical and other technical data related to this unit. The unit must be used in a properly grounded wall outlet.
General Safety • • • • • • • • • • • • • • • • • • To prevent back and other types of injuries, use at least two people to move and install the beverage refrigerator. This unit is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities, unless they have been given supervision or instruction concerning the use of the appliance by the person(s) responsible for their safety.
Table of Contents IMPORTANT SAFETY INFORMATION……………………………………………………………………………………... I TABLE OF CONTENTS……………………………………………………………………………………………………….. III First Time Operating Instructions……………………………………………………………………………………………... 1 INTRODUCTION……………………………………………………………………………………………………………….. 1 PARTS IDENTIFICATION…………………………………………………………………………………………………….. 2 FRONT VIEW……………………………………………………………………………………………………………………… 2 BACK VIEW………………………………………………………………………………………………………………………..
First Time Operating Instructions Before use, make sure all packaging labels and materials are all removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you are ever to move or ship the appliance in the future. Let the unit stand for at least 24 hours before you use it; this allows the cooling components time to settle from transit.
Parts Identification Tip: Gather the model and serial number from the product label and write them down before installing the beverage refrigerator.
Installing the Beverage Refrigerator The beverage refrigerator should be installed in accordance with local electrical code requirements. The beverage refrigerator should also be placed in a location that is strong enough to support its total weight, keeping in mind that it will weigh substantially more when fully loaded than when empty. Before you plug the beverage refrigerator into a power supply, be sure to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.
Installation Clearance Requirements To ensure proper ventilation, allow at least 5” of clearance at the back, 3” at the top, and 3” at the sides. Electrical Requirements • • • • • ELECTRIC SHOCK HAZARD! Plug into a grounded 3-prong outlet. Never remove the grounding prong from the plug. Never use an adapter to bypass the grounding prong. DO NOT use an extension cord. Failure to follow these instructions can result in fire, electrical shock, or death.
Recommended Grounding Method For your personal safety, this appliance’s plug must be grounded. It is equipped with a 3prong power supply cord. To minimize possible shock hazard, the cord must be plugged into a mating 3-pronged wall socket and grounded in accordance with the National Electrical Code and local codes and ordinances.
Reversing the Door Swing Tools needed: flathead screwdriver, Phillips screwdriver Important: Before you begin, unplug the beverage refrigerator from power. To Remove the Door: 1. 2. 3. 4. Using a flathead screw driver carefully pry the top hinge cover off. Using a Phillips screwdriver, remove the screws and take off the top hinge. Keep the parts together and set them aside. Lift the door off the bottom hinge and set the door aside.
Operation Installation Check List Before Operation 1. Have all packing materials and tape been removed from the interior and exterior of the beverage refrigerator? 2. Have the installation instructions been followed, including connecting the machine to electricity? And has proper grounding been installed for the beverage refrigerator? 3. Has the machine been leveled? 4. Is the beverage refrigerator in a site where the ambient temperature is between 50º F and 90º F all year round? 5.
Normal Sounds Your new beverage refrigerator may make sounds that are not familiar to you. Most of the new sounds are normal. Hard surfaces like the floor and walls can make the sounds seem louder than they actually are. The following describes the kinds of sounds that might be new to you and what may be making them. • Rattling noises may come from the flow of the refrigerant or the water line. Items stored on top of the beverage refrigerator can also make noises.
Cleaning and Maintenance Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life. Exterior Cleaning The door and cabinet may be cleaned with a mild detergent or hand soap mixed with water. Do not use solvent based or abrasive cleaners. Use a soft sponge and rinse with clean water. Wipe with a soft clean towel to prevent water spotting. If the door panel is stainless steel, it can discolor when exposed to chlorine gas and moisture.
Troubleshooting Before Calling for Help If the unit appears to be malfunctioning, read through the “Operation” section of this manual first. If the problem persists, check the Troubleshooting Guide below and on the following page. The problem could be something that can easily be solved or explained. Symptoms The beverage refrigerator turns on and off frequently. The beverage refrigerator does not turn on. Possible Causes The room temperature is higher than the recommended ambient temperature.
Symptoms The beverage refrigerator is making strange noises. Possible Causes Certain sounds are normal. The unit is not level or is touching another appliance. The body of the beverage refrigerator is electrified. The unit is not grounded properly. Frost is forming in the beverage refrigerator. The environment is humid. The ambient temperature is too low. The door gasket is not installed properly. The door is being opened too frequently. The door will not shut properly.
Specifications Note: Technical data and performance information are provided for reference only. Specifications are subject to change. Check the rating label on the wine refrigerator for the most accurate information. Description of product Freestanding Beverage Refrigerator Model BWC120SLD Voltage / Frequency AC 115 V~60 Hz Amperage 1.
EdgeStar Limited Warranty One (1) Year Parts & Ninety (90) Days Labor This product is warranted by EdgeStar to be free from defective workmanship and materials, subject to any conditions set forth as follows: WHAT IS COVERED: LABOR: For a period of NINETY (90) DAYS from the date of original purchase, labor will be performed free of charge at an authorized EdgeStar repair facility.
