Owner's Manual

8
4. Remove the lower hinge and bushing from the bottom right support bracket. Remove
the decorative screws from the left corner of the door and install and tighten them to
the right corner holes. Remove the plastic cap from the top left corner of the door and
insert it on the top right corner.
5. Install the lower hinge and bushing on the bottom left support bracket.
6. Carefully insert the door into the upper right corner hinge, then slide the door on top
of the lower hinge and secure the door by installing the lower screws.
Operation
Installation Check List Before Operation
1. Have all packing materials and tape been removed from the interior and exterior of the
beverage cooler?
2. Have the installation instructions been followed, including connecting the machine to
electricity, and has proper grounding been installed for the beverage cooler?
3. Has the machine been leveled?
4. Is the beverage cooler in a site where the ambient temperature is between 50° F and 95° F
all year round?
5. Is there a clearance of at least 2” at the rear,
1
/
2
” at the top, and ½” at the sides for proper
air circulation?