Owner's Manual

9
Using the Temperature Control Panel
Use the up and down buttons to adjust the temperature. The temperature can be displayed in
Fahrenheit or Celsius. This beverage cooler has a temperature range from 38° F to 50° F.
This beverage cooler has two displays: a Set Display that shows the set temperature, and a
Current Temperature Display that shows the current temperature.
Note: It is normal for the set temperature and current temperature displays to be a few degrees
different from each other.
Press the button on the control panel to lower the temperature by 1 degree increments.
Allow at least 24 hours before storing your beverages to allow the temperature to acclimate.
Press the button on the control panel to increase the temperature by 1 degree increments.
Press and hold the power button for approximately 3 seconds to turn the unit’s power on or off.
The Run Light will illuminate when the unit is working.
The Celsius or Fahrenheit light will be lit depending on which unit of temperature is being
displayed. To switch between Celsius and Fahrenheit, press the °C/°F button.
Note: Whether your beverage cooler can reach the actual set temperature depends on the
ambient environmental conditions.
Caution: If you powered off the unit, please wait at least 5 minutes before powering it back on.