Owner's Manual

4
Important Notes:
 Choose a location that has ambient temperatures above 50° F and below 95° F. Operation outside
these temperatures may result in lowered efficiency or cause other adverse effects.
 This unit MUST be installed in an area protected from the elements, e.g. wind, rain, water spray or
drips.
 The beverage cooler should not be located next to ovens, grills, or other high heat sources.
 Do not kink or pinch the power supply cord between the beverage cooler and the wall or cabinet.
Installation Clearance Requirements
When installing the beverage cooler under a counter, follow the recommended spacing
dimensions shown.
 To ensure proper service access and ventilation, allow at least 2” of clearance at the back,
1
/
2
” at the top and
1
/
2
” at the sides. The installation should allow the unit to be pulled forward
for servicing, if necessary.
 The beverage cooler should be installed on a firm and level surface that will be able to
support the entire weight of a fully loaded unit. It is important for the beverage cooler to be
level in order to work properly. If needed, you can adjust the height of the beverage cooler
by rotating the feet. See the “Leveling the Beverage cooler” section.
 A standard electrical supply (115 VAC only, 60 Hz), properly grounded in accordance with
National Electrical Code and local codes and ordinances, is required.