Owner's Manual

5. Pop out the cover caps on the left side of cabinet and use them to cover the screw holes on the right hand

side.

6. Screw the alternate left top hinge (9), included in the fittings, on the left hand side of cabinet.

7. Unscrew and transfer the lock bracket (11) to the opposite side of the glass door. Then use the cover (10)

included in the fittings to cover the three holes left after unscrewing the lock bracket.

8. Rotate the door 180° and relocate to the designated position. Then screw the bottom hinge assembly on the

left designated position and tighten it after the door is leveled.

9. Reassemble the kick plate.

Installation Check List Before Operation

1. Have all packing materials and tape been removed from the interior and exterior of the

wine refrigerator?

2. Have the installation instructions been followed, including connecting the machine to

electricity? And has proper grounding been installed for the wine refrigerator?

3. Has the machine been leveled?

4. Is the wine refrigerator in a site where the ambient temperature is between 50° F and

95° F all year round?

5. Is there a clearance of at least 1- 2” at the rear, 1/4” at the top, and 1/4” at the sides for

proper air circulation?