Installation Guide

8
Important Notes:
• Choose a location that has ambient temperatures above 50° F and below 95° F. Operation outside
these temperatures may result in lowered efficiency or cause other adverse effects.
• This unit MUST be installed in an area protected from the elements, e.g. wind, rain, water spray or
drips.
• The Wine Cooler should not be located next to ovens, grills, or other high heat sources.
• Do not kink or pinch the power supply cord between the Wine Cooler and the wall or cabinet.
Installation Clearance Requirements
When installing the Wine Cooler under a counter, follow the recommended spacing dimensions
shown.
• To ensure proper service access and ventilation, allow at least 1-2” of clearance at the
back,
1
/
4
” at the top, and
1
/
4
” at the sides. If the door side is against a wall, allow at least
• 2
3
/
8
” of clearance. The installation should allow the unit to be pulled forward for servicing,
if necessary.