THANK YOU! Congratulations on your purchase of this versatile EdgeStar product that combines an evaporative air cooler and a humidifier. To get the best cooling effect from your product please read these instructions carefully. For the best cooling performance from your unit, first fill it with water. If ice is available, this will increase its cooling power. Position the unit in a place such that air will be able to “flow through” the area.
5. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit as this may void the warranty. 6. Check the household voltage to ensure it matches the appliance’s rate specification. 7. DO NOT cover the air inlet or outlet. 8. Always unplug the product before refilling the water tank. 9. Always unplug the product when not in use. To disconnect from the power supply, grip the plug and pull it from the power socket. Never pull by the plug out by the cord. 10.
TIMER OPERATION • The TIMER can be used to switch the product off after a selected number of hours. • Turn the unit on. • Select the desired operating mode, speed, etc. • Press the TIMER button once and the product will switch off after 1 hour. Press the button again for 2 hours, again for 3 hours etc. The maximum timer setting is 8 hours. The LED display will show the number of hours the timer is currently set for.
• CONTROL PANEL • • • Press the MODE button to select the COOL MODE, as indicated by the LED. The full effect of this mode will begin to be felt after about 3 minutes. Once all the water in the tank has been used turn the product OFF, unplug it from the electrical socket, and refill the tank. To turn the product OFF press the POWER button again. If you do not intend to use the product again for some time empty the water tank. To empty the water tank, turn the unit off using the POWER button.
