Owner Manual

22
CAUTION: The included ceramic flame tamers are only meant for use with the main cast
burners. Do not install the ceramic flame tamers over the included infrared burner(s) as
they will be damaged. For information on purchasing additional / substitute burners,
please visit www.edgestar.com.
Note: This EdgeStar series of grills also includes stainless steel zone dividers that are
placed between each burner. These help to maintain the temperature in each “zone” –
the grilling surface area above each burner. Though not pictured here, ensure that
these are installed before putting the flame tamers in place.
Included Cooking Components
Before using the EdgeStar gas grill for the first time, be sure to thoroughly wash [by hand] the
included ceramic flame tamers, the cooking grates, the warming rack, and the rotisserie forks
under hot water with soap. Do not wash these components in your dishwasher. Allow them
to dry before reinstalling in the grill.
For an even heat and cooking experience, this series of grills includes ceramic briquette flame
tamers. Install the ceramic flame tamers above the main cast burners. There are cast pegs in
the firebox on which the flame tamers rest.
The cooking grids (grates) can now be installed over the flame tamers: