Owner Manual

10
Troubleshooting
Before Calling for Help
If the unit appears to be malfunctioning, read through the “Operation” section of this manual
first. If the problem persists, check the Troubleshooting Guide below and on the following
page. The problem could be something that can easily be solved or explained.
Symptoms
Possible Causes
Solutions
The beverage refrigerator
turns on and off frequently.
The room temperature is
higher than the recommended
ambient temperature.
Run the unit at the
appropriate ambient
temperature.
The door is being opened too
often.
Minimize the number of times
the door is opened.
The door is not completely
closed.
Make sure the door is
completely closed.
The door gasket is not sealing
properly.
Make sure the door gasket is
properly sealing.
The refrigerator does not
have the suggested
ventilation.
Read and follow the
“Installation Clearance
Requirements” section.
The beverage refrigerator
does not turn on.
There is a power failure.
Ensure that the unit is
plugged in and that the power
outlet has power.
The unit is not plugged in.
Plug the unit in to a power
outlet that has sufficient
amperage.
A house fuse has blown or
the circuit breaker is tripped.
Replace the broken fuse in
your fuse box or reset the
breaker.
The beverage refrigerator will
not reach the desired
temperature.
The unit is placed too close to
a heat source.
Keep the unit away from
direct sunlight or other heat
sources.
The refrigerator does not
have sufficient ventilation.
Read and follow the
“Installation Clearance
Requirements” section.
The door is opened too
frequently or for a long period
of time.
Close the door tightly and do
not open the door too
frequently or for a long period
of time.